Tiara Yacht Owners Forum

Full Version: Anchor Rode Compartment Drains
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
I would like to re-bed the hull drain fittings from anchor rode compartment on my 1997 31' foot open. However I'm concerned that the existing plastic drains might be brittle and break during disassembly. Searching online I cannot find any replacements. I looked at  possibly using a fuel vent however they are stainless or plated, I much prefer white plastic.  Suggestions appreciated. 

Tom
(11-21-2024, 03:32 PM)nylakeshome Wrote: [ -> ]I would like to re-bed the hull drain fittings from anchor rode compartment on my 1997 31' foot open. However I'm concerned that the existing plastic drains might be brittle and break during disassembly. Searching online I cannot find any replacements. I looked at  possibly using a fuel vent however they are stainless or plated, I much prefer white plastic.  Suggestions appreciated. 

Tom

Forespar Thru-Hull Vent # 907029 is plastic
WM # 412445
I would cut out the screen

Paul
Fitting found 
For future reference. Tiara provided me with information on the original fitting which is available from [Only registered and activated users can see links Click here to register]. Part number 6202W 3/4" IMP Drain- White. 

Tom