![]() |
|
Fuel tank debris - Printable Version +- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum) +-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6) +--- Forum: General Repairs & Maintenance (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=10) +--- Thread: Fuel tank debris (/showthread.php?tid=5788) Pages:
1
2
|
RE: Fuel tank debris - AyeCandy - 01-22-2019 Do you know what the diameter of the fuel pick-ups are? Did you say you used cork gasket material to re-seal the tank? RE: Fuel tank debris - reeltimebrad - 01-23-2019 I think it was around.835 as .840 is the standard for 1/2-14 pipe threads. I used 1/8 cork gasket material for the access panel but viton rubber would have worked as well and would probably hold up better long term. RE: Fuel tank debris - AyeCandy - 02-24-2019 Do you know of any commercially available screen filters that would work on the fuel pickups? If not, I would be glad to pay you to have you make some up for me. If you made those, you are more talented than I am! Let me know if you are able to help. Thanks! RE: Fuel tank debris - reeltimebrad - 02-24-2019 I don't know of any that are commercially made I'll look a look. I can make a few to sell next time I have a chance, may take me a month or so. I'll pm you before I start anything. Might be able to get this to work easier I'll look into it. RE: Fuel tank debris - Dave Young - 02-26-2019 Great job on those screens. I'm curious how you did that joint. Is it solder? What kind of flux did you use with the stainless? I'd like to make similar screens for one of my forklifts. Rosin core or solid solder wire? RE: Fuel tank debris - reeltimebrad - 02-26-2019 You can purchase wire mesh that is already welded into a diameter with open ends. I used a laser welder to attach the screen to the stainless disc. |