+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6)
+--- Forum: Gas Engines/Transmissions (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=26)
+--- Thread: Crusader exhaust Y or T fitting (/showthread.php?tid=124)
Crusader exhaust Y or T fitting - Wish You Were Here - 02-08-2012
I have a 2700 open, 1985. twin crusader 270's. the exhaust manifolds and elbows / risers and all piping connecting to the back towards the transom has been rusted out. I replaced everything but am dumbfounded to the connectors. Usually most are standard 4 in...but what I have is a Y or modified T connector that goes from a 3 in x 3 in x 3.5 in.
I have searched all over and found only one cast iron one (I need two) and the supplier tells me that the manufacturer does not make these any more and that I have to get fiberglass ones...I don't mind that but seems that I have to custom order them from Centex in Georgia...
Anyone know of where I can get one more in LA / Orange County / San Diego area? You would be of great help if you know where I can get one.