+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6)
+--- Forum: General Repairs & Maintenance (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=10)
+--- Thread: Aft Deck Seating (/showthread.php?tid=2351)
Pages:
1
2
Aft Deck Seating - eric_nelson - 11-25-2015
Hi,
Any idea where I can find aft deck seating similar to the bench that Tiara use to option? It was flat bench with folding legs. Just got a message from Tiara that they don't offer this anymore and the original manufacturer is out of business. Below is a little more detail provided by Tiara Customer Service.
"The removable option was simply a bench seat that was on four trapezoidal legs, held down by quick release pins, but here again there were components involved that we can no longer get (such as the pin receptacles that were mounted in the deck)."
Any ideas, advice or if you have for sale, please let me know. Thanks again!
Eric
Here is a picture of what I believe they look like.
![[Image: 5050167_20150407172552785_1_XLARGE.jpg&w...1963284000]](http://newimages.yachtworld.com/resize/1/1/67/5050167_20150407172552785_1_XLARGE.jpg?f=/1/1/67/5050167_20150407172552785_1_XLARGE.jpg&w=924&h=693&t=1431963284000)
RE: Aft Deck Seating - Uhehner - 11-25-2015
I have the two starboard pieces that you need from my "88 31 Open. They measure about 24 X 42 X 3/4 inches and are very heavy. The brackets shown in your picture went with the boat when I sold it. My brackets did not fold, they were exactly like those in your picture. There were 5/16 - 18 SS knobs and studs that screwed into the deck to hold them in place as your picture shows. I still have two of them for sale on eBay. I sold the remainder. Search under "Tiara". Capt. George
RE: Aft Deck Seating - bluebikemike - 11-25-2015
Go online to Birdsall Marine Design. They offer a folding rear bench seat in a variety of sizes
Good luck.
RE: Aft Deck Seating - trit21 - 11-25-2015
Enclosed link has some folding brackets I have seen some Tiara's use as well. Just have to make sure it is fastened to the rear deck very well. You would have to have a seat made but might be a nice feature since it will fold out of the way.
RE: Aft Deck Seating - stones throw - 12-21-2015
(11-25-2015, 04:56 PM)trit21 Wrote:
Enclosed link has some folding brackets I have seen some Tiara's use as well. Just have to make sure it is fastened to the rear deck very well. You would have to have a seat made but might be a nice feature since it will fold out of the way.
I have a Tiara factory molded box or bench seat that was used on my 1989 33' open...It has a naugahide white cushion top and the shape of the box is designed to fit in the back transom area. Let me know if your interested Ill sell it cheap....$100
RE: Aft Deck Seating - tpteifer - 01-06-2016
(11-25-2015, 02:02 PM)Uhehner Wrote: I have the two starboard pieces that you need from my "88 31 Open. They measure about 24 X 42 X 3/4 inches and are very heavy. The brackets shown in your picture went with the boat when I sold it. My brackets did not fold, they were exactly like those in your picture. There were 5/16 - 18 SS knobs and studs that screwed into the deck to hold them in place as your picture shows. I still have two of them for sale on eBay. I sold the remainder. Search under "Tiara". Capt. George
RE: Aft Deck Seating - tpteifer - 01-26-2016
Did Tiara say they have a source for the legs?
(11-25-2015, 12:29 PM)eric_nelson Wrote: Hi,
Any idea where I can find aft deck seating similar to the bench that Tiara use to option? It was flat bench with folding legs. Just got a message from Tiara that they don't offer this anymore and the original manufacturer is out of business. Below is a little more detail provided by Tiara Customer Service.
"The removable option was simply a bench seat that was on four trapezoidal legs, held down by quick release pins, but here again there were components involved that we can no longer get (such as the pin receptacles that were mounted in the deck)."
Any ideas, advice or if you have for sale, please let me know. Thanks again!
Eric
Here is a picture of what I believe they look like.
RE: Aft Deck Seating - eric_nelson - 01-27-2016
HI,
Spoke with factory and they dont have source for legs or any specs.
Eric
Aft Deck Seating - Ohana John - 02-21-2016
(11-25-2015, 02:02 PM)Uhehner Wrote: I have the two starboard pieces that you need from my "88 31 Open. They measure about 24 X 42 X 3/4 inches and are very heavy. The brackets shown in your picture went with the boat when I sold it. My brackets did not fold, they were exactly like those in your picture. There were 5/16 - 18 SS knobs and studs that screwed into the deck to hold them in place as your picture shows. I still have two of them for sale on eBay. I sold the remainder. Search under "Tiara". Capt. George
Capt. George
I purchased a 2001 coronet last year. The deck chairs shown in the photo came with my boat but the previous owner didn't have what he called the pins anymore. I have been trying to search for them online but I have had no success. The parts that I need to fasten the chairs down are the 15/16-8ss knobs you listed?
Sent from my iPhone using Tapatalk
RE: Aft Deck Seating - Uhehner - 02-22-2016
I sold all the knobs and threaded rods I had on eBay. Why not just go to ACE Hardware and purchase 5/16- 18 Stainless Hex Head bolts at what ever length you need? Add a flat washer and be done with it. Capt. George