+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6)
+--- Forum: General Repairs & Maintenance (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=10)
+--- Thread: Zinc for a 29 Open (/showthread.php?tid=2752)
Zinc for a 29 Open - Ohana John - 03-21-2016
This is the first year that I'm purchasing Zincs for the boat. Does any one have a list of the zincs needed?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
RE: Zinc for a 29 Open - Uhehner - 03-22-2016
Measure your prop shaft diameter and the size of your existing rudder and trim-tab zincs and the transom zinc if you have one. Also remove the engine pencil zincs from your heat ex-changers. Then go to West or eBay and match them up. You can't go wrong with CAMP zincs. Clean the surfaces real well before you install new ones, they must make a solid electrical contact. Google "How to install zincs" . You need a heavy hammer to bed shaft zincs. Cut off the excess screw length on the rudders with a hacksaw. Capt George