Tiara Yacht Owners Forum
1996 Tiara 3300 Open Salon Table - Printable Version

+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6)
+--- Forum: General Repairs & Maintenance (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=10)
+--- Thread: 1996 Tiara 3300 Open Salon Table (/showthread.php?tid=3899)



1996 Tiara 3300 Open Salon Table - SBLASZLO - 01-10-2017

Hello Everyone

I'm a new member and a new Tiara owner. I just purchased a beautiful 1996 Tiara 3300 Open.
I got and extra set of short legs for the salon table so it can be modified to be part of the "bed".

Does anyone know how do I change up the legs from the "long" to the "short" ones?

Thanks in advance.


RE: 1996 Tiara 3300 Open Salon Table - ReelMagic - 01-11-2017

Not sure how the 33 Open is configured but on my previous Tiara, a 1997 31 Open, all that was required was to lift the table top off the long legs and then pull the legs out of the bases on the floor. Once completed I replaced with the short legs and table top providing a bed........


1996 Tiara 3300 Open Salon Table - bigboatben - 01-11-2017

Can you post a picture of the short legs? Interested to see the ends of them


Sent from my iPhone using Tapatalk


RE: 1996 Tiara 3300 Open Salon Table - ReelMagic - 01-11-2017

(01-11-2017, 05:28 PM)bigboatben Wrote: Can you post a picture of the short legs? Interested to see the ends of them


Sent from my iPhone using Tapatalk

No.. I no longer own the 31.... I currently own a 2003 38 that has a different leg system.... It has a lockable spring loaded leg.... Sorry..... Anyone with a 31 Open should be able to provide.... From what I remember the ends of the legs (short and long) were tapered slightly.....


1996 Tiara 3300 Open Salon Table - bigboatben - 01-11-2017

(01-10-2017, 11:27 PM)SBLASZLO Wrote: Hello Everyone

I'm a new member and a new Tiara owner. I just purchased a beautiful 1996 Tiara 3300 Open.
I got and extra set of short legs for the salon table so it can be modified to be part of the "bed".

Does anyone know how do I change up the legs from the "long" to the "short" ones?

Thanks in advance.


Can you post pictures of the table legs I'm interested to see the ends of the legs


Sent from my iPhone using Tapatalk