Tiara Yacht Owners Forum
2006 Tiare Sovran 3600 how do I remove the steering wheel? - Printable Version

+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6)
+--- Forum: General Repairs & Maintenance (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=10)
+--- Thread: 2006 Tiare Sovran 3600 how do I remove the steering wheel? (/showthread.php?tid=3947)



2006 Tiare Sovran 3600 how do I remove the steering wheel? - sluggo - 01-23-2017

Somehow I think I bent (warped) the steeling wheel, and I would like to have it straightened.  I got the cap off, and then there is a nut, I got the nut off, but nothing.  I cant tell if there is a retaining ring, or snap clip or not that needs removed.  Someone suggested beating on the nut and it should pop lose.  So Before I try that, I thought I would ask, and see if there is something simpler.  TIA

(it is one of those pretty big (2'?) in diameter wheels with wood on the outside)


RE: 2006 Tiare Sovran 3600 how do I remove the steering wheel? - efontana - 01-23-2017

(01-23-2017, 02:18 PM)sluggo Wrote: Somehow I think I bent (warped) the steeling wheel, and I would like to have it straightened.  I got the cap off, and then there is a nut, I got the nut off, but nothing.  I cant tell if there is a retaining ring, or snap clip or not that needs removed.  Someone suggested beating on the nut and it should pop lose.  So Before I try that, I thought I would ask, and see if there is something simpler.  TIA

(it is one of those pretty big (2'?) in diameter wheels with wood on the outside)

I've removed mine, after removing the center bolt, you need a puller, I got one at a local autozone. Mine was the
kind with 3 adjustable grabbers and a center bolt, you adjust it and turn the bolt
on the center, it came off easily.

Mine was similar to this one:
http://www.autozone.com/test-scan-and-specialty-tools/parts-puller-installer/oem-jaw-puller/246386_0_0?checkfit=true

You put the center bolt (with the point) in the center of the bolt (that you removed the nut from), then adjust the grabbers around the stainless ring, then using a wrench turn the center bolt.

Basically like this:

http://continuouswave.com/whaler/reference/images/teleflex/3-gearPuller600x450.jpg


RE: 2006 Tiare Sovran 3600 how do I remove the steering wheel? - sluggo - 01-23-2017

(01-23-2017, 02:40 PM)efontana Wrote:
(01-23-2017, 02:18 PM)sluggo Wrote: Somehow I think I bent (warped) the steeling wheel, and I would like to have it straightened.  I got the cap off, and then there is a nut, I got the nut off, but nothing.  I cant tell if there is a retaining ring, or snap clip or not that needs removed.  Someone suggested beating on the nut and it should pop lose.  So Before I try that, I thought I would ask, and see if there is something simpler.  TIA

(it is one of those pretty big (2'?) in diameter wheels with wood on the outside)

I've removed mine, after removing the center bolt, you need a puller, I got one at a local autozone. Mine was the
kind with 3 adjustable grabbers and a center bolt, you adjust it and turn the bolt
on the center, it came off easily.

Mine was similar to this one:
http://www.autozone.com/test-scan-and-specialty-tools/parts-puller-installer/oem-jaw-puller/246386_0_0?checkfit=true

You put the center bolt (with the point) in the center of the bolt (that you removed the nut from), then adjust the grabbers around the stainless ring, then using a wrench turn the center bolt.

Basically like this:

http://continuouswave.com/whaler/reference/images/teleflex/3-gearPuller600x450.jpg
Thanks!  so to be clear you have the same boat??  TIA


RE: 2006 Tiare Sovran 3600 how do I remove the steering wheel? - efontana - 01-23-2017

(01-23-2017, 02:45 PM)sluggo Wrote:
(01-23-2017, 02:40 PM)efontana Wrote:
(01-23-2017, 02:18 PM)sluggo Wrote: Somehow I think I bent (warped) the steeling wheel, and I would like to have it straightened.  I got the cap off, and then there is a nut, I got the nut off, but nothing.  I cant tell if there is a retaining ring, or snap clip or not that needs removed.  Someone suggested beating on the nut and it should pop lose.  So Before I try that, I thought I would ask, and see if there is something simpler.  TIA

(it is one of those pretty big (2'?) in diameter wheels with wood on the outside)

I've removed mine, after removing the center bolt, you need a puller, I got one at a local autozone. Mine was the
kind with 3 adjustable grabbers and a center bolt, you adjust it and turn the bolt
on the center, it came off easily.

Mine was similar to this one:
http://www.autozone.com/test-scan-and-specialty-tools/parts-puller-installer/oem-jaw-puller/246386_0_0?checkfit=true

You put the center bolt (with the point) in the center of the bolt (that you removed the nut from), then adjust the grabbers around the stainless ring, then using a wrench turn the center bolt.

Basically like this:

http://continuouswave.com/whaler/reference/images/teleflex/3-gearPuller600x450.jpg
Thanks!  so to be clear you have the same boat??  TIA

Yep!


RE: 2006 Tiare Sovran 3600 how do I remove the steering wheel? - sluggo - 01-23-2017

(01-23-2017, 02:49 PM)efontana Wrote:
(01-23-2017, 02:45 PM)sluggo Wrote:
(01-23-2017, 02:40 PM)efontana Wrote:
(01-23-2017, 02:18 PM)sluggo Wrote: Somehow I think I bent (warped) the steeling wheel, and I would like to have it straightened.  I got the cap off, and then there is a nut, I got the nut off, but nothing.  I cant tell if there is a retaining ring, or snap clip or not that needs removed.  Someone suggested beating on the nut and it should pop lose.  So Before I try that, I thought I would ask, and see if there is something simpler.  TIA

(it is one of those pretty big (2'?) in diameter wheels with wood on the outside)

I've removed mine, after removing the center bolt, you need a puller, I got one at a local autozone. Mine was the
kind with 3 adjustable grabbers and a center bolt, you adjust it and turn the bolt
on the center, it came off easily.

Mine was similar to this one:
http://www.autozone.com/test-scan-and-specialty-tools/parts-puller-installer/oem-jaw-puller/246386_0_0?checkfit=true

You put the center bolt (with the point) in the center of the bolt (that you removed the nut from), then adjust the grabbers around the stainless ring, then using a wrench turn the center bolt.

Basically like this:

http://continuouswave.com/whaler/reference/images/teleflex/3-gearPuller600x450.jpg
Thanks!  so to be clear you have the same boat??  TIA

Yep!
Thanks again!  I'll stick it on there and try and not worry about the little thing I think is some sort of keyway.


RE: 2006 Tiare Sovran 3600 how do I remove the steering wheel? - efontana - 01-23-2017

(01-23-2017, 02:52 PM)sluggo Wrote:
(01-23-2017, 02:49 PM)efontana Wrote:
(01-23-2017, 02:45 PM)sluggo Wrote:
(01-23-2017, 02:40 PM)efontana Wrote:
(01-23-2017, 02:18 PM)sluggo Wrote: Somehow I think I bent (warped) the steeling wheel, and I would like to have it straightened.  I got the cap off, and then there is a nut, I got the nut off, but nothing.  I cant tell if there is a retaining ring, or snap clip or not that needs removed.  Someone suggested beating on the nut and it should pop lose.  So Before I try that, I thought I would ask, and see if there is something simpler.  TIA

(it is one of those pretty big (2'?) in diameter wheels with wood on the outside)

I've removed mine, after removing the center bolt, you need a puller, I got one at a local autozone. Mine was the
kind with 3 adjustable grabbers and a center bolt, you adjust it and turn the bolt
on the center, it came off easily.

Mine was similar to this one:
http://www.autozone.com/test-scan-and-specialty-tools/parts-puller-installer/oem-jaw-puller/246386_0_0?checkfit=true

You put the center bolt (with the point) in the center of the bolt (that you removed the nut from), then adjust the grabbers around the stainless ring, then using a wrench turn the center bolt.

Basically like this:

http://continuouswave.com/whaler/reference/images/teleflex/3-gearPuller600x450.jpg
Thanks!  so to be clear you have the same boat??  TIA

Yep!
Thanks again!  I'll stick it on there and try and not worry about the little thing I think is some sort of keyway.

The piece of metal, "the key" stays in the square groove in the shaft and wheel hub. I replaced my wheel with a new one, and the new wheel came with a new key. Make sure you don't drop and/or lose the key. It will come right out no problem with the puller.