Tiara Yacht Owners Forum
Looking for Hardtop for an 86, 3600 - Printable Version

+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: The Nautical Flea Market (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=4)
+--- Forum: Boat Part Classifieds - NO BOATS (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=12)
+--- Thread: Looking for Hardtop for an 86, 3600 (/showthread.php?tid=42)



Looking for Hardtop for an 86, 3600 - Mike D - 02-25-2011

I am looking for a factory or good (excellent) aftermarket hardtop to replace the bimini top. Any suggestions or guidance would be greatly appreciated.

Thanks,
Mike


Looking for Hardtop for an 86, 3600 - Tiara Mike - 02-26-2011

Just heard Tiara is now making Factory Hardtops once again for early model Tiaras Cool


Looking for Hardtop for an 86, 3600 - secondchancemarine - 02-26-2011

Hi my company Second Chance Marine can make a custom Aluminum hard top for that boat. Where are you located? contact me at cb@secondchancemarine.com


Looking for Hardtop for an 86, 3600 - Tonyo - 03-01-2011


This is a post that I found on the Tiara website that has info that may be of assistance to you.


Posted by jmk 02/17/2011 07:42 AM
Topic: FACTORY Hardtops

Tiara is now selling factory hardtops to fit older (Classsic) Opens from 31-43 feet. I've been looking at tops for years, visited Atlantic Tower and got pics from Vancouver. I spoke to the Tiara rep and these factory tops are a new design that just blow away anything else that is available. Models available are as follows: 3100 Open (S1, T1 and P1), 3300 Open (C3), 3400 Open Pursuit (P4), 3500 Open (R4), 3500 Express (M3), 3600 Open (S6), 3700 Open (N7), 4000 Express (M4), 4100 Open (N4), 4300 Open (S4). Prices are from 13.5k to 16.5k depending on model. Anyone interested in splitting shipping costs to New Jersey?


Looking for Hardtop for an 86, 3600 - Mike D - 03-01-2011

Thanks, I saw that too, 13K is kind of steep


RE: Looking for Hardtop for an 86, 3600 - Sasha - 02-22-2021

[attachment=784][attachment=784][attachment=784][quote="Mike D" pid='92' dateline='1298679795']
I am looking for a factory or good (excellent) aftermarket hardtop to replace the bimini top.  Any suggestions or guidance would be greatly appreciated.

Thanks,
Mike
Hi, I have  36 open 1995 and just finished a hard top installation which was manufactured by Tiara and shipped down from the Michigan plant January 6th this year. Photo was taken Saturday 2/20 while I am preparing for new bottom and shaft alignment. The starboard dialed out at 8 mill so time to attend to both. 

All work is done in Stuart at American Custom Yachts. The support structure for top was designed and built by Bausch American Towers at ACY. New Garmin Fantom 124 will be installed next week along with the Garmin weather module to interface with the radar and two 12 inch MFD's. 
Tiara's Brian Kane was supportive through the build and I could not be happier with the results.