+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6)
+--- Forum: General Repairs & Maintenance (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=10)
+--- Thread: VDO sending units (/showthread.php?tid=4641)
VDO sending units - drifter - 07-02-2017
It's been mentioned here using VDO sending units with VDO gauges. How important is this? For example should VDO oil pressure sensors be used with VDO gauges? In the Crusader parts manual both sensors are listed for the oil pressure gauges.
RE: VDO sending units - jclark003 - 07-02-2017
need to make sure the senders impedance range matches that of the gauge, whether you use VDO or some other manufacturer. Keep in mind some VDO senders are floating ground normally open or normally closed depending on the gauge type and some of their gauges expect impedance ranges not normally used by other/US manufacturers. So in some cases you may not have a choice but to use their sender.
RE: VDO sending units - drifter - 07-03-2017
I'll check it out. I believe VDO has it on their web site.