+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6)
+--- Forum: Gas Engines/Transmissions (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=26)
+--- Thread: 1994 3100 Open elbows size (/showthread.php?tid=4750)
1994 3100 Open elbows size - Salt shaker - 07-26-2017
Hi all, I'm getting ready to order manifolds and elbows for my 454 crusaders. The shop noted I have an older model and they are shorter than the new. Difference is 1-3/4. My friends 1996 looks to have both versions on port and stbd, so i think I'm ok. Notes below from the shop. I haven't actually measured it. Can anyone help me confirm the taller will fit?
Those are the very early elbows.
These were replaced by the taller R029015, they are 1-3/4 inches taller than what you have.
Do you have the hatch clearance?
If you do not have the clearance we’ll have to order the earlier elbow (98126)
thanks!
RE: 1994 3100 Open elbows size - Salt shaker - 07-27-2017
Thanks to the help of a plastic knife i had on board, it looks like I have 3" of clearance. thanks