![]() |
|
Replicating Tiara's Modified Sump Box - Printable Version +- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum) +-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6) +--- Forum: The Tiara Yachts Project Center (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=11) +--- Thread: Replicating Tiara's Modified Sump Box (/showthread.php?tid=5149) |
Replicating Tiara's Modified Sump Box - ddfour1 - 01-22-2018 I thought I would post this in case anyone else is facing the same issue. I have a 2003 3500 Open. The pump in my Rule Sump Box stopped working. I cleaned the box out but was not able to get the pump operating again so I decided to replace the entire box with a new one. That is when I figured out that Tiara had modified the box to accommodate a couple extra plumbing lines. Here is what was needed to replicate the modification on my boat: Rule 98A shower drain kit; 7/8" spade bit (this new hole accommodates the hose from the AC condensate line; that hose comes with its own fitting that could be re-used); 1 3/8" hole saw; Sea Choice plastic thru-hull hose fitting (part 18091); and Permatex Gasket Maker, teflon string and marine silicone sealant. The thru-hull fitting being added accommodates the shower drain. The hose from my shower drain was stretched a bit such that I was getting some drips even with the double worm gear clamps. I beefed up the new thru hull flange with some Permatex liquid gasket maker and teflon string to stop the leak. RE: Replicating Tiara's Modified Sump Box - tcates1225 - 01-23-2018 Thank You for the information. I am sure it will come in handy for others. In the middle of going through all my systems this year. |