+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6)
+--- Forum: Gas Engines/Transmissions (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=26)
+--- Thread: Prop shaft adjustment on Hurth HSW 630 V1 (/showthread.php?tid=5488)
Prop shaft adjustment on Hurth HSW 630 V1 - rwshevy - 07-09-2018
Upon inspection of the mechanicals before our next trip I noted that the lock nut on the prop shaft exiting the transmission was loose. The V-drives are coupled to 8.1 Crusader engines. I retightened the locking nut, but noted that the primary nut was not tight, but could be adjusted. I searched for the specifications on the prop shaft adjustment/tolerances but could not find any information related to this specific area. Any guidance or information would be appreciated. Thank you in advance.