+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6)
+--- Forum: General Repairs & Maintenance (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=10)
+--- Thread: starboard bottom cover (/showthread.php?tid=561)
starboard bottom cover - justrollin - 10-29-2013
First Mate
Posts: 51
IP Logged WANTED starboard bottom cover that fits around prop shaft at entry. It prevents cavitation. Needed for 1998 31ft open :help:
starboard bottom cover - Jakes - 10-30-2013
I pulled my 4100 out yesterday and noticed that the strbd. cover (plate around shaft entry) was not fully attached to the hull. Do you know how it is attached...glue? Thanks
Scotty
starboard bottom cover - justrollin - 10-30-2013
Im not sure but i think it has pins that it clips into mine is missing totally so I need one.
starboard bottom cover - roboh20 - 10-30-2013
1996 29 Open my covers are held on buy 8 screws. Have heard a replacement is about $500.00 not sure if for one or two, only avalible through Tiara. When taken off for any reason I use an adhesive caulk then screw it back on.
starboard bottom cover - justrollin - 12-31-2013
Tiara has informed me that 5200 fast cure is what is needed to put bottom plate back on they are makeing me one as I write,no mention of screws as yet but will ask them when it ships.
starboard bottom cover - Chris Burkard - 01-02-2014
I believe they are screwed, but just to hold the cover in place while the 5200 sets.