+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6)
+--- Forum: General Repairs & Maintenance (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=10)
+--- Thread: 99 31 open transducer (/showthread.php?tid=5786)
99 31 open transducer - Lafobrian@gmail.com - 12-09-2018
i bought the boat with a nice simard evo2 radar and gps but the transducers that are in the boat are not compatible. They make a flush mount thru hull but I’m not sure which “degree” to get. Anyone been down this route yet??
RE: 99 31 open transducer - Uhehner - 12-09-2018
(12-09-2018, 07:14 AM)Lafobrian@gmail.com Wrote: i bought the boat with a nice simard evo2 radar and gps but the transducers that are in the boat are not compatible. They make a flush mount thru hull but I’m not sure which “degree” to get. Anyone been down this route yet??
Just change the connector on the transducer cable to one that fits your depth unit. Wiring diagrams are on the Airmar web sight.
Capt George
RE: 99 31 open transducer - Sans Peur - 12-09-2018
I went from Raymarine to Garmin. I bought the splice kit and used the existing transducer and it worked perfectly. Airmar makes most of the transducers and the only difference is usually the connector on the end of the cable.
RE: 99 31 open transducer - Lafobrian@gmail.com - 12-14-2018
Thanks. I will have to look into this a little more. I really don’t fish with the boat but I thought it would be nice to have