+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6)
+--- Forum: The Tiara Yachts Project Center (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=11)
+--- Thread: [Tiara Open] Hatch Rings cabin headliner (/showthread.php?tid=5897)
Hatch Rings cabin headliner - Eric Wachsning - 03-06-2019
Looking to replace my cabin headliner hatch rings on my 31 open. I contacted Tiara about these parts and was told they were made by a company called SSI plastics .Unfortunately SSI has not been much help .If anyone knows where to get them it would be greatly appreciated.
Thanks
Hatch Rings cabin headliner - Misdirection - 03-06-2019
I'm surprised you don't have Bomar hatches. I see on Defender.com they sell the hatch trim rings. You might just need to find a model on there that meets the dimensions of your hatch and order those trim rings....Good luck...
Sent from my XT1635-01 using Tapatalk
bruce33 - bruce33 - 03-06-2019
(03-06-2019, 03:41 PM)Eric Wachsning Wrote:
RE: Hatch Rings cabin headliner - Eric Wachsning - 03-06-2019
I have the older style where the 3/4" plexiglass hatches sit inside the opening and are locked down to a gasket from the hardware that is attached to the trim rings. The hatch rings were originally made by SSI plastics in MD but they will not return my calls or emails for some reason. The plexiglass was made by Total plastics in IL. Fortunately I don't need the glass just the rings.
[attachment=497]
Hatch Rings cabin headliner - bruce33 - 03-07-2019
Maybe try one of there distributors? There are a few good ones on here.
Sent from my iPhone using Tapatalk