+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: General Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=3)
+--- Forum: Tiara Yachts Model Discussion (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=24)
+--- Thread: [Tiara Open] Trying to determine tiara open model.... (/showthread.php?tid=6158)
Trying to determine tiara open model.... - Line2draw - 07-01-2019
I'm looking at a Tiara from an estate sale. Advertised as a 1989 Tiara open (3100) but it has a layout of a 3300, a dinette with opposite couch. Did they make a 3100 with this layout? Can any one on this forum tell if I provide a Hull #? I'm not able to get exact measurements of beam and length at this point...
Line2draw
#ssuc3143e989
RE: Trying to determine tiara open model.... - Misdirection - 07-01-2019
(07-01-2019, 01:53 PM)Line2draw Wrote: I'm looking at a Tiara from an estate sale. Advertised as a 1989 Tiara open (3100) but it has a layout of a 3300, a dinette with opposite couch. Did they make a 3100 with this layout? Can any one on this forum tell if I provide a Hull #? I'm not able to get exact measurements of beam and length at this point...If you email Tiara customer service, they can confirm the model based upon the serial number. They are typically very quick to respond as well. Contact info is a form from their website.
Line2draw
#ssuc3143e989
Sent from my XT1635-01 using Tapatalk
RE: Trying to determine tiara open model.... - Line2draw - 07-01-2019
(07-01-2019, 03:02 PM)Misdirection Wrote:(07-01-2019, 01:53 PM)Line2draw Wrote: I'm looking at a Tiara from an estate sale. Advertised as a 1989 Tiara open (3100) but it has a layout of a 3300, a dinette with opposite couch. Did they make a 3100 with this layout? Can any one on this forum tell if I provide a Hull #? I'm not able to get exact measurements of beam and length at this point...If you email Tiara customer service, they can confirm the model based upon the serial number. They are typically very quick to respond as well. Contact info is a form from their website.
Line2draw
#ssuc3143e989
Sent from my XT1635-01 using Tapatalk
Thanks, I emailed them over a week ago with no response. I'll try again.
Line2draw
RE: Trying to determine tiara open model.... - Hot Shot - 07-01-2019
If it has a step down gunnel it's a 33' not a 31 open. Plus the refer cabinet comes back into the cockpit on the Port side.
RE: Trying to determine tiara open model.... - Maxwell - 07-02-2019
Looking at the hull ID, it appears that it is a 31, hull #43, built in 1989?
RE: Trying to determine tiara open model.... - Line2draw - 07-06-2019
We
(07-02-2019, 12:48 PM)Maxwell Wrote: Looking at the hull ID, it appears that it is a 31, hull #43, built in 1989?
Thanks Maxwell!