+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6)
+--- Forum: General Repairs & Maintenance (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=10)
+--- Thread: re pulpit roller (/showthread.php?tid=629)
re pulpit roller - naysayer - 01-17-2014
recently, the roller came off my recessed anchor pulpit on my 89 33 open.
I don't know what it looked like before, and tiara could not help me.
does anyone have the same boat, and would consider emailing me pictures of the whole assembly?
the replacement cost of the whole unit, if I can even get it, will be ridiculous.
I think I can have someone weld a roller on for a lot cheaper.
if you do, you can email me at kowtko@sbcglobal.net
thanks,,
mark
re pulpit roller - mikefromlb - 01-21-2014
Mark: Own 1989 Tiara 33 open. Had my anchor roller replaced at a local shipyard In October 2013.
They had to remove the anchor roller plate and fabricated/installed a fiberglass roller. They found lots of dry rot in the pulpit and made extensive repairs before installing it.
Original estimate was $500 before dry rot repairs.
Hope this helps! Mike
re pulpit roller - Dazzle - 03-07-2014
Hi Mark,
I assuming you are "Naysayer" home port of Noank.
If so... there is a 33 open at Brewers is Mystic. I believe it is shrink wraped at this time, but the cover should be off in 45 - 60 days.