+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6)
+--- Forum: General Repairs & Maintenance (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=10)
+--- Thread: [Tiara Open] Anchor Washdown Tiara 3800 Open (/showthread.php?tid=6767)
Anchor Washdown Tiara 3800 Open - MDG1957 - 04-17-2020
I have a 2005 Tiara 3800 Open. It appears that the anchor locker is plumbed for fresh and raw water washdown. There are two hoses that are capped off in the anchor locker. Can anybody get me a picture of what one or both of these looks like with terminal fixtures. If possible, both sides of the connection would be helpful (source and outlet). Thanks.
Anchor Washdown Tiara 3800 Open - bsause - 04-17-2020
![[Image: fd7cca538778d1de4c5ac1579d49494a.jpg]](https://uploads.tapatalk-cdn.com/20200417/fd7cca538778d1de4c5ac1579d49494a.jpg)
![[Image: cea05bc38e17925bbacb6e235f8d6e0d.jpg]](https://uploads.tapatalk-cdn.com/20200417/cea05bc38e17925bbacb6e235f8d6e0d.jpg)
Sent from my iPhone using Tapatalk
These are my Capt. This is what you want.
Sent from my iPhone using Tapatalk
RE: Anchor Washdown Tiara 3800 Open - MDG1957 - 04-17-2020
(04-17-2020, 12:55 PM)bsause Wrote:
Sent from my iPhone using Tapatalk
These are my Capt. This is what you want.
Sent from my iPhone using Tapatalk
Thanks. So those are the same HFC fittings I have for my raw water washdown in the back. I'll have to see how can fish the roughed in lines back to this point. They are in a small passageway forward of the locker. Looks like a job for small hands - lol.
Anchor Washdown Tiara 3800 Open - bsause - 04-17-2020
Good luck !!
#lovemytiara
Sent from my iPhone using Tapatalk
RE: Anchor Washdown Tiara 3800 Open - MDG1957 - 04-24-2020
(04-17-2020, 02:56 PM)bsause Wrote: Good luck !!
#lovemytiara
Sent from my iPhone using Tapatalk
So, my year, 2005, does not have this shelf in the anchor locker, but the pictures are still very helpful. I am going to attach a length of tube and a quick connect to the rough-in at the top of the stem and attach to the inside of the hull with a bracket. I'll post a picture when I do it in a couple days. If I find I like it, I might put a flush mount quick connect on the foredeck, like the older Tiaras had.
]https://www.freshwatersystems.com/products/seatech-st301-speed-tap-housing-white-with-msp101-hose-adaptor?variant=13250448228395&c1=GAW_SE_NW&source=PLA_USA_SS&cr2=smart_shopping__-__all_products_112768&kw=2000_2540_0&cr6=pla&cr7=c&utm_campaign=gs-2020-01-06&utm_source=google&utm_medium=smart_campaign&gclid=EAIaIQobChMI_sD0npyB6QIVka_ICh0RmweoEAQYASABEgLz2vD_BwE