+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6)
+--- Forum: General Repairs & Maintenance (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=10)
+--- Thread: portholes (/showthread.php?tid=7446)
portholes - dduca@comcast.net - 03-09-2021
need to replace porthole screens,four in total,2001 open express,any ideas?.
portholes - bsause - 03-09-2021
I think !!!! Maybe tiara has them
Call them
Sent from my iPhone using Tapatalk
RE: portholes - Gosseligbeg - 03-09-2021
Try GG Schmidt and Sons......
The last know contact information I had for them are:
info@GGSchmidt.com
Offices in Lancaster, PA. 717-394-3701
or Sarasota, FL 941-360-1973
good luck
RE: portholes - Jimnic - 05-06-2021
Sorry for the late reply but..... if gg Schmitt isn’t the answer, the people at hatch masters dot com were super helpful with tracking down help with my 2000 2900. As it turns out the port lights are made by bomar/ pompette I was in touch woth Marty and he was super helpful in getting the correct gaskets, which included the screens as well.
RE: portholes - tim11.tjb - 05-20-2021
I am in the middle of doing my screens on my 2004 3100 Open. I don't think it is too difficult for someone with average capability. So far I have been able to remove the screen insert from the inside of the portholes. Use an awl or small flat screw driver to wedge between the rubber seal and the screen. Once you get the rubber to pull away from the porthole it peels away all the way around from the inside of the porthole. That exposes the screen insert which easily pops out. This is where I am at now. I should be able to find a way to fit the new screen and clamp it while securing it with silicone. Once dry I will trim the excess and silicone the rubber seal back in.