+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6)
+--- Forum: General Repairs & Maintenance (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=10)
+--- Thread: [Tiara Open] Transom thickness on 3500 Open (/showthread.php?tid=7492)
Transom thickness on 3500 Open - Best Team - 04-02-2021
I basically need to know if the transom is less than or more than 50mm thick.
Thanks!
Transom thickness on 3500 Open - Misdirection - 04-02-2021
Since 50mm is about 2", and the way everything else on a Tiara is made, I would expect the transom is thicker than that.
Sent from my SM-A505U using Tapatalk
RE: Transom thickness on 3500 Open - reeltimebrad - 04-05-2021
It's definitely less than 2 inches. my 32 is about a 5/8 all fiberglass no coring and if you include the swim platform it's still less than a inch overall.
RE: Transom thickness on 3500 Open - Best Team - 04-05-2021
(04-05-2021, 03:07 PM)reeltimebrad Wrote: It's definitely less than 2 inches. my 32 is about a 5/8 all fiberglass no coring and if you include the swim platform it's still less than a inch overall.
Thanks very much, I'll go with the 50mm version.
RE: Transom thickness on 3500 Open - cernst - 04-18-2021
You can get a fairly good idea by measuring the distance (A) inside in the bilge from the trim tab bolts that come thru the hull bottom to the transom inside surface, then on the outside under the boat measure the distance (B) from the same trim tab bolts to the outside transom surface. B – A = Transom thickness