+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6)
+--- Forum: Electrical (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=30)
+--- Thread: Troubleshooting raymarine power issues - 2010 3600 Open (/showthread.php?tid=7748)
Troubleshooting raymarine power issues - 2010 3600 Open - coyler - 07-09-2021
Hi everyone-
2010 3600 Open.
For the first time in 3 years, I can not get navigation electronics (Raymarine e140W + ST70s) to power-up. DC switch panel does not have a switch for the electronics. Same with helm circuit breaker - no breakers there.
Does anyone have an idea where to start troubleshooting? Presumably there are a set of fuses behind the helm but not sure if that's where I should start. Thanks for the help.
RE: Troubleshooting raymarine power issues - 2010 3600 Open - Donaldjames - 07-09-2021
Are you sure you checked ALL The breakers?
RE: Troubleshooting raymarine power issues - 2010 3600 Open - Sans Peur - 07-10-2021
Start at the power cable behind the unit and work backwards from there. If everything else is working, it's not going to be a major issue. Probably an inline fuse or where the power cable connects to the bus bar.
RE: Troubleshooting raymarine power issues - 2010 3600 Open - coyler - 07-12-2021
Closing this out. Donald was spot on. One missed panel switch which I found after hours with the voltmeter in tight quarters. Now I fully understand the wiring and location of the inline fuses.
Thanks for the help. User error strikes again.
RE: Troubleshooting raymarine power issues - 2010 3600 Open - Donaldjames - 07-12-2021
It happens to all of us, glad you found it, Happy Boating