![]() |
|
[Tiara Open] Waste cap replacement / Vacuflush - Printable Version +- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum) +-- Forum: General Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=3) +--- Forum: Tiara Yachts Model Discussion (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=24) +--- Thread: [Tiara Open] Waste cap replacement / Vacuflush (/showthread.php?tid=7751) |
Waste cap replacement / Vacuflush - if Knot now - 07-11-2021 Hi
I have 2 problems maybe related
1.waste cap no longer seats in threads on through hull fitting tried numerous new caps Easy to replace both??
2. Vacuflush made by Domentic keeps cycling to gain air pressure even though new pump
RE: Waste cap replacement / Vacuflush - GMahanna - 07-11-2021 (07-11-2021, 06:01 AM)if Knot now Wrote: The pump cycling is to to a vacuum leak. The pump does not create pressure. It creates vacuum. There is a leak somewhere in the system or a bad vacuum pressure switch. A common problem is the duckbill valves, which are one way rubber valves on either side of the pump. RE: Waste cap replacement / Vacuflush - ReelMagic - 07-11-2021 Agree w/Gmahnna, most likely a vacuum leak at the "duckbills". Believe you need 4 (2 each side of vacuum generator). I attached a parts list for my system but most likely they use the same duck bills (part #14). M2C RE: Waste cap replacement / Vacuflush - Sans Peur - 07-11-2021 Does you toilet hold water in the bowl? I recently had to replace the bowl.seal as it would leak the water into the vacuum system and once dry they don't seal and the pump would cycle on all the time. |