![]() |
|
Cleaning seacocks - Printable Version +- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum) +-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6) +--- Forum: General Repairs & Maintenance (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=10) +--- Thread: Cleaning seacocks (/showthread.php?tid=8356) |
Cleaning seacocks - honest mark - 07-19-2022 Boat was originally in salt water, now Great Lakes, that green discolored salt stain is on my thru hull sea cocks, I used vinegar and baking soda and a steel brush, anyone got a better idea??? Is there sum spray on stuff?? Any tricks??? It’s coming off but so is my arm from rubbing, lol, thanks ??? RE: Cleaning seacocks - Gosseligbeg - 07-19-2022 (07-19-2022, 01:16 PM)honest mark Wrote: Boat was originally in salt water, now Great Lakes, that green discolored salt stain is on my thru hull sea cocks, I used vinegar and baking soda and a steel brush, anyone got a better idea??? Is there sum spray on stuff?? Any tricks??? It’s coming off but so is my arm from rubbing, lol, thanks ??? I have had good success with "Presta AP Deck Cleaner"...... on the decks. I have no idea if it will address thru-hull fittings. I believe this Presta product comes in a small 16-20 ozs spray.....Spec sheet is online at prestaproducts.com RE: Cleaning seacocks - honest mark - 07-20-2022 FYI, I used the vinegar and baking soda and it worked great with a wire brush about the size of a toothbrush RE: Cleaning seacocks - jclark003 - 07-21-2022 A brass wire wheel on a drill will make quick work of them. Small hand brush to get in crevices. I used a can of clear coat after cleaning them up to keep them shiny |