+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6)
+--- Forum: General Repairs & Maintenance (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=10)
+--- Thread: [Tiara Open] Gas shocks on my 3500 optional cockpit lounge. (/showthread.php?tid=8559)
Gas shocks on my 3500 optional cockpit lounge. - TP3 - 03-18-2023
Good Morning all. Looking for specs on the 2 gas shocks for the optional cockpit lounge on my 3500. Original shocks were not on boat when purchased. Without them the hatch is like a guillotine. Haha. Any help would be appreciated
RE: Gas shocks on my 3500 optional cockpit lounge. - Ken Grabowski - 03-18-2023
[quote="TP3" pid='19411' dateline='1679155594']
Good Morning all. Looking for specs on the 2 gas shocks for the optional cockpit lounge on my 3500. Original shocks were not on boat when purchased. Without them the hatch is like a guillotine. Haha. Any help would be appreciated
[/
The original shocks were also not adequate. Get the strongest ones that will fit.
RE: Gas shocks on my 3500 optional cockpit lounge. - wardoutcharterservices - 03-19-2023
this is where I ordered mine for a 2005 Coronet. you just need the measurements
Maxum Hardware
Products
------------------------------------------------------
2 x Ameritool 625-3 Gas Spring () = $101.34
a) Spring Force Amount 40
b) Barrel Side End Fitting A1 - EFC-10M Composite End Fitting
c) Rod Side End Fitting A1 - EFC-10M Composite End Fitting
d) Oil Type Standard Oil
e) Barrel Finish Standard Finish
Rod Dia (d): 0.25
Cylinder Dia (D): 0.625
Stroke (A): 3.0
Extended Length (L): 10.0
Compressed Length (CL): 7.0
End Detail: 10mm
Force: 5-90 Lbs