[Tiara Open] Maxwell windless - Printable Version +- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum) +-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6) +--- Forum: General Repairs & Maintenance (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=10) +--- Thread: [Tiara Open] Maxwell windless (/showthread.php?tid=8970)

Maxwell windless - lewisduk85@yahoo.com - 08-06-2024 Need some help trying to figure out what kind of stripper I need for my Maxwell windlass.  I have a 1999 37 open and my Maxwell windlass plastic stripper broke. I’m assuming it’s the RC800 series can anybody help? RE: Maxwell windless - Hifirush - 08-08-2024 I have the same windlass and had to do a little maintenance, here is what I bought, it says its for Freedom, but it is what I needed for the RC800 [Only registered and activated users can see links Click here to register] And [Only registered and activated users can see links Click here to register] RE: Maxwell windless - TenBayFive - 08-28-2024 I just got done fixing my maxwell windlass on our 2010 3200 Open, which I believe is original.  It is a maxwell freedom 500.  It would obviously be helpful to know what model windlass you have.  RC800 is a relatively newer one I think.  Anyway, the little plastic stripper piece is readily available and easy to replace, but be careful because there are a million little washers and things to keep track of when you take apart the windlass topside assembly.  Maxwell's manual for mine was pretty helpful.