Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
High Water Bilge Alert
#1
My alarm for the high water bilge alert (Johnson Pump) is stuck on full alarm.  I have checked the bilges and no water.  Bilge pumps work fine.  I suspect a fuse but wonder if anyone has experience with this and how to change out the fuses?  Don't see a breaker thrown for this.  A 2010 3200 open.
Like Post Reply

#2
(06-27-2018, 08:53 AM)johnsbr321@gmail.com Wrote: My alarm for the high water bilge alert (Johnson Pump) is stuck on full alarm.  I have checked the bilges and no water.  Bilge pumps work fine.  I suspect a fuse but wonder if anyone has experience with this and how to change out the fuses?  Don't see a breaker thrown for this.  A 2010 3200 open.

Just my opinion, but if it were a blown fuse the alarm would not work at all.
On my boat the HW alarm has nothing to do with the bilge pump circuit . I have two float switches, one forward (For when the boat is off plane ) and one aft ( for when the bow is up and running ) Each is a RULE float switch connected to an alarm bell at the helm and mounted above the level of the bilge pump switch.. I lift all the floats and check the pumps and the alarms on a regular basis.
Capt. George
Like Post Reply
#3
Thanks Capt. George
Like Post Reply
#4
(06-28-2018, 06:40 AM)johnsbr321@gmail.com Wrote: Thanks Capt. George
Ever find out why high water alarm is stuck on
Like Post Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Water leak under exhaust outlet. cp4000 2 157 09-10-2021, 10:12 AM
Last Post: cp4000
  [Tiara Open] 01 3800 Open Fresh Water Pump Issue twilson0929 14 562 09-07-2021, 07:44 PM
Last Post: ReelMagic
  12v fuse for aft bilge pump -FYI cp4000 0 64 09-07-2021, 09:23 AM
Last Post: cp4000
  Water tank Avalon 0 60 09-03-2021, 03:49 PM
Last Post: Avalon
  Water pump retro fit kit for the 8..1 Rcc96 2 185 08-15-2021, 11:00 PM
Last Post: Rcc96



Users browsing this thread:
1 Guest(s)

High Water Bilge Alert00