The 2 part cover of my wetbar has some small rubber/vinyl spacers/cushions. They are flat six sided in shape with adhesive backs. The adhesive on mine have failed & need to replace them. I am sure they area a 10 cent item. Any help is appreciated.
Author's Statistic:
Posts: 356
Threads: 6
Likes Given: 1
Likes Received: 51 in 48 posts
Joined: Dec 2010
Home Port: Kings Park, NY
Vessel Info: 2003 38' Open Cummin's 6CTA's (450 hp)
Posts: 356
Threads: 6
Likes Given: 1
Likes Received: 51 in 48 posts
Joined: Dec 2010
Home Port: Kings Park, NY
Vessel Info: 2003 38' Open Cummin's 6CTA's (450 hp)
I had a similar problem with the wet bar rubber/vinyl spacers/cushions.. I used gorilla glue and it seems to be working. Glued them several years ago and they are still there
The following 1 user Likes ReelMagic's post:1 user Likes ReelMagic's post bsause (10-28-2019)
11-02-2019, 07:33 AM (This post was last modified: 11-02-2019, 07:33 AM by bsause.)
(10-28-2019, 03:45 PM)OurHighLife Wrote: Thanks Capt Brett, I did get some from ACE, however they were a bit thicker that the originals, I may go back to look for different ones.
ReelMagic, I will try that, but I think 1 or 2 may be missing.
Awesome!!
Capt Brett M Sause
USCG Master Licensed Captain
443-220-4339
Sent from my iPhone using Tapatalk
(10-28-2019, 03:45 PM)OurHighLife Wrote: Thanks Capt Brett, I did get some from ACE, however they were a bit thicker that the originals, I may go back to look for different ones.
ReelMagic, I will try that, but I think 1 or 2 may be missing.
Awesome!!
Capt Brett M Sause
USCG Master Licensed Captain
443-220-4339
Sent from my iPhone using Tapatalk