04-01-2021, 03:30 PM (This post was last modified: 04-01-2021, 03:31 PM by ctkite.)
The guy pulled the risers elbows and the like ... said it took 40 hours labor @ 125 per hr. I figured a long day a side if I did it myself and im not a pro. anyone do this and can give me a idea if this is crazy . TIA
98 coronet xli's
Hi,
Unless there were a whole lot of issues, $5,000 is crazy.
I did mine as you said, one day per engine. You should have a discussion and a break down of the costs. You'll be doing this again in 4years if you're in the salt and you need to understand what went wrong.
Regards,
Paul
The following 3 users Like Capt. Paul's post:3 users Like Capt. Paul's post ctkite (04-01-2021), Misdirection (04-01-2021), reeltimebrad (04-02-2021)
Author's Statistic:
Posts: 149
Threads: 28
Likes Given: 0
Likes Received: 11 in 9 posts
Joined: Dec 2016
Home Port: Long Island Sound
Vessel Info: 3100 Open, 2002 Model Year, 8.1L Crusaders
Posts: 149
Threads: 28
Likes Given: 0
Likes Received: 11 in 9 posts
Joined: Dec 2016
Home Port: Long Island Sound
Vessel Info: 3100 Open, 2002 Model Year, 8.1L Crusaders
I did my own and I bet I could have done them both in one long day. 2 days tops. Unless they pulled all of the exhaust hoses and exhaust elbows and inspected them all. But even then it is only another 4-5 hours.