Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Tiara Open Transom thickness on 3500 Open
#1
    How thick is the transom on a 3500 Open?  Am going to buy an Imtra SX50 stern thruster, and the pipe that carries the cables through the transom is available in two lengths - 50mm and 150mm.
I basically need to know if the transom is less than or more than 50mm thick.
Thanks!
[-] The following 1 user Likes Best Team's post:
jmk (04-09-2021)
Like Post Reply

#2
Since 50mm is about 2", and the way everything else on a Tiara is made, I would expect the transom is thicker than that.

Sent from my SM-A505U using Tapatalk
Like Post Reply
#3
It's definitely less than 2 inches. my 32 is about a 5/8 all fiberglass no coring and if you include the swim platform it's still less than a inch overall.
Like Post Reply
#4
(04-05-2021, 03:07 PM)reeltimebrad Wrote: It's definitely less than 2 inches. my 32 is about a 5/8 all fiberglass no coring and if you include the swim platform it's still less than a inch overall.

Thanks very much, I'll go with the 50mm version.
Like Post Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  1990 3600 Open gauge identification 67-LS1 0 105 04-03-2021, 12:49 PM
Last Post: 67-LS1
  [Tiara Open] 3800 Open Holding Tank Vent Filter MediumRareBagel 2 146 03-28-2021, 11:48 AM
Last Post: ReelMagic
  [Tiara Open] 1995 Tiara 43 Open water tank and door/stairs removal chrisrobinson99 3 156 03-13-2021, 09:59 AM
Last Post: chrisrobinson99
  3800 Open (‘01) - Hot Water Heater Removal RobRay 4 309 03-11-2021, 08:36 AM
Last Post: RobRay
  ‘96 3500 express engine room hatch removal for repower crapshoot 0 95 03-08-2021, 10:14 PM
Last Post: crapshoot



Users browsing this thread:
1 Guest(s)

Transom thickness on 3500 Open00