Author's Statistic:
Posts: 58
Threads: 9
Likes Given: 5
Likes Received: 15 in 10 posts
Joined: Jun 2019
Home Port: NY, Long Island, South shore
Vessel Info: 1998 4000 Express, Cat 3208
Posts: 58
Threads: 9
Likes Given: 5
Likes Received: 15 in 10 posts
Joined: Jun 2019
Home Port: NY, Long Island, South shore
Vessel Info: 1998 4000 Express, Cat 3208
If it's a tubular frame with a little plate on top for the radar, you can fish tape all the way through to behind the gunwale where it's attached to the side of the boat. My 1986 3100 had a couple of holes in the bottom of the arch for access.
When we need to fish wire thru electrical conduit, we tie a piece of cotten to a string and feed it thru one end and use a high powered shop vac on the other to "suck" it thru. If you find access points, maybe you can try that as well.
Author's Statistic:
Posts: 228
Threads: 45
Likes Given: 0
Likes Received: 17 in 12 posts
Joined: Dec 2016
Home Port: Long Island Sound
Vessel Info: 3100 Open, 2002 Model Year, 8.1L Crusaders
Posts: 228
Threads: 45
Likes Given: 0
Likes Received: 17 in 12 posts
Joined: Dec 2016
Home Port: Long Island Sound
Vessel Info: 3100 Open, 2002 Model Year, 8.1L Crusaders
When I pulled the access covers off on the arch and I took out the drink holder next to the captains seat I found a piece of pull cord in there. Don't know who put it there but it is very handy.