I would like to re-bed the hull drain fittings from anchor rode compartment on my 1997 31' foot open. However I'm concerned that the existing plastic drains might be brittle and break during disassembly. Searching online I cannot find any replacements. I looked at possibly using a fuel vent however they are stainless or plated, I much prefer white plastic. Suggestions appreciated.
(11-21-2024, 03:32 PM)nylakeshome Wrote: I would like to re-bed the hull drain fittings from anchor rode compartment on my 1997 31' foot open. However I'm concerned that the existing plastic drains might be brittle and break during disassembly. Searching online I cannot find any replacements. I looked at possibly using a fuel vent however they are stainless or plated, I much prefer white plastic. Suggestions appreciated.
Tom
Forespar Thru-Hull Vent # 907029 is plastic
WM # 412445
I would cut out the screen
Fitting found
For future reference. Tiara provided me with information on the original fitting which is available from [Only registered and activated users can see links Click here to register]. Part number 6202W 3/4" IMP Drain- White.