<![CDATA[Tiara Yacht Owners Forum - General Boating Discussion]]> https://www.tiaraownersclub.com/forum/ Sun, 26 Apr 2026 14:43:07 +0000 MyBB <![CDATA[Pre start for 2000 31 open]]> https://www.tiaraownersclub.com/forum/showthread.php?tid=9302 Thu, 26 Mar 2026 00:18:42 +0000 https://www.tiaraownersclub.com/forum/showthread.php?tid=9302 I come from Aviation background use to checklists but new to this boat, I’ve only had small outboards 
I’m looking for a step by step checklist for start up]]> I come from Aviation background use to checklists but new to this boat, I’ve only had small outboards 
I’m looking for a step by step checklist for start up]]> <![CDATA[Just purchased a 2006 Tiara 3200 new Buffalo MI]]> https://www.tiaraownersclub.com/forum/showthread.php?tid=9234 Wed, 05 Nov 2025 16:28:17 +0000 https://www.tiaraownersclub.com/forum/showthread.php?tid=9234 <![CDATA[Engine temps]]> https://www.tiaraownersclub.com/forum/showthread.php?tid=9232 Sun, 02 Nov 2025 18:05:21 +0000 https://www.tiaraownersclub.com/forum/showthread.php?tid=9232 <![CDATA[I am looking for a site or place to download an owner's manual.]]> https://www.tiaraownersclub.com/forum/showthread.php?tid=9161 Fri, 01 Aug 2025 23:42:58 +0000 https://www.tiaraownersclub.com/forum/showthread.php?tid=9161
Also, any information on a replacement head.]]>
Also, any information on a replacement head.]]> <![CDATA[Tiara open 3000 - 2007]]> https://www.tiaraownersclub.com/forum/showthread.php?tid=9095 Wed, 23 Apr 2025 14:56:59 +0000 https://www.tiaraownersclub.com/forum/showthread.php?tid=9095
Thank you Max.]]>
Thank you Max.]]> <![CDATA[PAINT OR WRAP]]> https://www.tiaraownersclub.com/forum/showthread.php?tid=9072 Tue, 18 Mar 2025 18:39:56 +0000 https://www.tiaraownersclub.com/forum/showthread.php?tid=9072 <![CDATA[Trailering a 32 open]]> https://www.tiaraownersclub.com/forum/showthread.php?tid=9041 Fri, 20 Dec 2024 17:44:04 +0000 https://www.tiaraownersclub.com/forum/showthread.php?tid=9041 I'm looking to purchase a 2006 32 open and was wondering if anyone on here has one that they trailer.
Just wondering what trailer you have and the rig you use to pull it.
thanks]]> I'm looking to purchase a 2006 32 open and was wondering if anyone on here has one that they trailer.
Just wondering what trailer you have and the rig you use to pull it.
thanks]]> <![CDATA[Stern thruster]]> https://www.tiaraownersclub.com/forum/showthread.php?tid=8997 Thu, 19 Sep 2024 11:27:25 +0000 https://www.tiaraownersclub.com/forum/showthread.php?tid=8997 <![CDATA[Ignition keys]]> https://www.tiaraownersclub.com/forum/showthread.php?tid=8922 Sat, 29 Jun 2024 14:30:52 +0000 https://www.tiaraownersclub.com/forum/showthread.php?tid=8922 Do I need to purchase special?

1995 Tiara 33 open]]> Do I need to purchase special?

1995 Tiara 33 open]]> <![CDATA[High oil pressure readings]]> https://www.tiaraownersclub.com/forum/showthread.php?tid=8878 Mon, 15 Apr 2024 21:03:41 +0000 https://www.tiaraownersclub.com/forum/showthread.php?tid=8878
Engines are crusader, gas. 454 xl

After changing the oil at the end of the season, oil pressure jumped to 80 psi.

Same type oil and filter.

Changed oil filter again per forum suggestions - still issues

Sending unit new.

Anyone have experience changing oil pressure release?

Any other suggestions would be appreciated.]]>
Engines are crusader, gas. 454 xl

After changing the oil at the end of the season, oil pressure jumped to 80 psi.

Same type oil and filter.

Changed oil filter again per forum suggestions - still issues

Sending unit new.

Anyone have experience changing oil pressure release?

Any other suggestions would be appreciated.]]> <![CDATA[New owner]]> https://www.tiaraownersclub.com/forum/showthread.php?tid=8876 Fri, 05 Apr 2024 01:04:48 +0000 https://www.tiaraownersclub.com/forum/showthread.php?tid=8876 My immediate need is for hull specs to fit a trailer. At least the fore and aft deadrise angles would be helpful as the boat is almost 2 hours away and I have forgotten to take those measurements on my previous visits. 
In general, any leads on model specific information would be greatly appreciated. 

Thank you!
]]> My immediate need is for hull specs to fit a trailer. At least the fore and aft deadrise angles would be helpful as the boat is almost 2 hours away and I have forgotten to take those measurements on my previous visits. 
In general, any leads on model specific information would be greatly appreciated. 

Thank you!
]]> <![CDATA[Gel Coat Color]]> https://www.tiaraownersclub.com/forum/showthread.php?tid=8827 Thu, 04 Jan 2024 15:08:42 +0000 https://www.tiaraownersclub.com/forum/showthread.php?tid=8827 <![CDATA[2000 Coronet Upholstery]]> https://www.tiaraownersclub.com/forum/showthread.php?tid=8818 Sun, 17 Dec 2023 20:31:01 +0000 https://www.tiaraownersclub.com/forum/showthread.php?tid=8818
I have a Coronet that has a ripped starboard aft seat (behind the sink) that I want to have the upholstery replaced on.  It was easy enough to find the screws on the leading edge of the cushion, but it was still being held down from somewhere underneath.  I thought unzipping the cover would give me access to bolts under the cushion, and nothing there either.  After removing the cushion material I found a grey plastic plate affixed to the hatch.  Also, In the process of opening the zipper, the pull mechanisim turned to dust, so now my seat is a total mess. I lifted the hatch looking for access from underneath and everything is covered by the engine room insulation.  Can anyone verify that I should be cutting a small opening into the inslation to gain access to the seat bottom?

Thank you in advance for the help.

Greg
Annapolis, MD]]>
I have a Coronet that has a ripped starboard aft seat (behind the sink) that I want to have the upholstery replaced on.  It was easy enough to find the screws on the leading edge of the cushion, but it was still being held down from somewhere underneath.  I thought unzipping the cover would give me access to bolts under the cushion, and nothing there either.  After removing the cushion material I found a grey plastic plate affixed to the hatch.  Also, In the process of opening the zipper, the pull mechanisim turned to dust, so now my seat is a total mess. I lifted the hatch looking for access from underneath and everything is covered by the engine room insulation.  Can anyone verify that I should be cutting a small opening into the inslation to gain access to the seat bottom?

Thank you in advance for the help.

Greg
Annapolis, MD]]> <![CDATA[3800 Open Fresh Water Tank Mineral Deposits]]> https://www.tiaraownersclub.com/forum/showthread.php?tid=8813 Sun, 10 Dec 2023 21:46:54 +0000 https://www.tiaraownersclub.com/forum/showthread.php?tid=8813 <![CDATA[Surveyors]]> https://www.tiaraownersclub.com/forum/showthread.php?tid=8796 Wed, 08 Nov 2023 15:40:14 +0000 https://www.tiaraownersclub.com/forum/showthread.php?tid=8796 Low and behold the insurance company sends me a nasty gram you need your boat surveyed out of water by bla bla bla.
Are they buying my boat without my knowledge?
The last thing I want is some uh,person jamming ice picks into my bulkheads or running my boat wide open throttle across a lake full of debris to prove what?

I have a hard spot for surveyors with ice picks because I am sure that is the very reason the bones on my old Penn Yan were waterlogged and rotten.
Not all  the bones were rotten , just the ones with ice pick holes.

I never run my Crusaders over 3800 rpm and shouldn't have to scatter my cranks or destroy my hull just to suit them.
Any suggestions or opinions on this is greatly appreciated.
Rant off and thank you ladies and gentlemen.]]> Low and behold the insurance company sends me a nasty gram you need your boat surveyed out of water by bla bla bla.
Are they buying my boat without my knowledge?
The last thing I want is some uh,person jamming ice picks into my bulkheads or running my boat wide open throttle across a lake full of debris to prove what?

I have a hard spot for surveyors with ice picks because I am sure that is the very reason the bones on my old Penn Yan were waterlogged and rotten.
Not all  the bones were rotten , just the ones with ice pick holes.

I never run my Crusaders over 3800 rpm and shouldn't have to scatter my cranks or destroy my hull just to suit them.
Any suggestions or opinions on this is greatly appreciated.
Rant off and thank you ladies and gentlemen.]]> <![CDATA[New to me 32]]> https://www.tiaraownersclub.com/forum/showthread.php?tid=8785 Fri, 20 Oct 2023 12:23:45 +0000 https://www.tiaraownersclub.com/forum/showthread.php?tid=8785 <![CDATA[Where does the rainwater go?]]> https://www.tiaraownersclub.com/forum/showthread.php?tid=8745 Wed, 06 Sep 2023 21:03:20 +0000 https://www.tiaraownersclub.com/forum/showthread.php?tid=8745 Thank you in advance 
Harry]]> Thank you in advance 
Harry]]> <![CDATA[43 OPEN with 660 hp CAT's - best prop?]]> https://www.tiaraownersclub.com/forum/showthread.php?tid=8729 Mon, 21 Aug 2023 15:26:47 +0000 https://www.tiaraownersclub.com/forum/showthread.php?tid=8729
Current prop on boat is Federal Equi-Poise Cup 27x36.  I hit 2330 rpm's WOT at around 33 knots.]]>
Current prop on boat is Federal Equi-Poise Cup 27x36.  I hit 2330 rpm's WOT at around 33 knots.]]> <![CDATA[Water Pumps]]> https://www.tiaraownersclub.com/forum/showthread.php?tid=8727 Mon, 21 Aug 2023 10:05:24 +0000 https://www.tiaraownersclub.com/forum/showthread.php?tid=8727
Why two? 

Do I turn them both on when using water in the heads or sinks?

Also, if I leave them switched on, it seems to drain the tank quickly. Is that normal or do I just switch them off as soon as done using water? Can anyone help?]]>
Why two? 

Do I turn them both on when using water in the heads or sinks?

Also, if I leave them switched on, it seems to drain the tank quickly. Is that normal or do I just switch them off as soon as done using water? Can anyone help?]]> <![CDATA[Volvo vs other Diesel Engines]]> https://www.tiaraownersclub.com/forum/showthread.php?tid=8721 Mon, 14 Aug 2023 17:56:14 +0000 https://www.tiaraownersclub.com/forum/showthread.php?tid=8721