+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6)
+--- Forum: General Repairs & Maintenance (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=10)
+--- Thread: 1996 3300 Open Wiper length and sweep (/showthread.php?tid=1514)
1996 3300 Open Wiper length and sweep - SMSilvers - 05-10-2015
Hi all,
I have a 1996 3300 Open and I need to replace the windshield wipers.
On the Marinco AFI website for wipers, I am asked to specify a sweep angle of 65, 80, or 110 degrees… wiper motor post length, and both the wiper arm and wiper lengths.
I am having trouble finding these specs for my boat…. does anybody know these specs to share for my boat?
Thank you!
Scott
RE: 1996 3300 Open Wiper length and sweep - Uhehner - 05-13-2015
Why not measure for your self? A protractor for the sweep and a ruler for the arm length and blade length. The post length can be taken off the old unit or measure the thickness of the windshield frame and call AFI. I doubt that this spec will be available anywhere except from Tiara. Capt. George
RE: 1996 3300 Open Wiper length and sweep - SMSilvers - 05-16-2015
(05-13-2015, 07:20 AM)Uhehner Wrote:
wiper arm part #33037A
wiper blade part #33022B
If you have the room for an AFI 2.5 motor you can get a 24” blade.
Wiper motor part #82082
wiper arm part #33092
wiper blade part #33024S
You may have to change the sweep angle of the motor you purchase for your application. All of our motors can be set to 45, 60, 80, or 110 degree sweep.
---------------------------
I hope that this may be helpful for someone else as well.
Best,
Scott