Hi all,
I have a 1996 3300 Open and I need to replace the windshield wipers.
On the Marinco AFI website for wipers, I am asked to specify a sweep angle of 65, 80, or 110 degrees… wiper motor post length, and both the wiper arm and wiper lengths.
I am having trouble finding these specs for my boat…. does anybody know these specs to share for my boat?
Thank you!
Scott
Why not measure for your self? A protractor for the sweep and a ruler for the arm length and blade length. The post length can be taken off the old unit or measure the thickness of the windshield frame and call AFI. I doubt that this spec will be available anywhere except from Tiara. Capt. George
(05-13-2015, 07:20 AM)Uhehner Wrote: [Only registered and activated users can see links Click here to register]
wiper arm part #33037A [Only registered and activated users can see links Click here to register]
wiper blade part #33022B [Only registered and activated users can see links Click here to register]
If you have the room for an AFI 2.5 motor [Only registered and activated users can see links Click here to register] you can get a 24” blade.
Wiper motor part #82082 [Only registered and activated users can see links Click here to register]
wiper arm part #33092 [Only registered and activated users can see links Click here to register]
wiper blade part #33024S [Only registered and activated users can see links Click here to register]
You may have to change the sweep angle of the motor you purchase for your application. All of our motors can be set to 45, 60, 80, or 110 degree sweep. --------------------------- I hope that this may be helpful for someone else as well.
![[-]](https://www.tiaraownersclub.com/forum/images/netpen-pro/collapse.png)
