+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6)
+--- Forum: General Repairs & Maintenance (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=10)
+--- Thread: Porthole screen replacement (/showthread.php?tid=5099)
Porthole screen replacement - reeltimebrad1 - 01-03-2018
Looking for a way to repair the glued in screen on my portholes. I thought they were Bomar but there not. Its a 2006 3200 open. Does anyone know who made the portholes and if there is a screen repair kit as it would be very difficult to reglue a new screen in without removing the entire porthole.Thanks.
RE: Porthole screen replacement - Maxwell - 01-03-2018
GG Schmitt and Sons is who made them for my 2003 42 Open
Porthole screen replacement - bruce33 - 01-04-2018
(01-03-2018, 09:58 AM)reeltimebrad1 Wrote: Looking for a way to repair the glued in screen on my portholes. I thought they were Bomar but there not. Its a 2006 3200 open. Does anyone know who made the portholes and if there is a screen repair kit as it would be very difficult to reglue a new screen in without removing the entire porthole.Thanks.
The place that Max said is golden. They are reasonably and they give you the instructions. It truly is pretty simple.
Sent from my iPad using Tapatalk
RE: Porthole screen replacement - reeltimebrad1 - 01-05-2018
Thanks for the reply's your both correct. The gasket is held in with silicone and has to be removed to replace the screen all of which can be done without removal of the frame or trim ring.
RE: Porthole screen replacement - williamwalter - 05-04-2018
Just wondering if anyone has tried painting screens as mine are faded and look bad but are intact otherwise.