[reeltimebrad1]

Looking for a way to repair the glued in screen on my portholes. I thought they were Bomar but there not. Its a 2006 3200 open. Does anyone know who made the portholes and if there is a screen repair kit as it would be very difficult to reglue a new screen in without removing the entire porthole.Thanks.

[Maxwell]

GG Schmitt and Sons is who made them for my 2003 42 Open

[Only registered and activated users can see links Click here to register]

[bruce33]

Looking for a way to repair the glued in screen on my portholes. I thought they were Bomar but there not. Its a 2006 3200 open. Does anyone know who made the portholes and if there is a screen repair kit as it would be very difficult to reglue a new screen in without removing the entire porthole.Thanks.

The place that Max said is golden. They are reasonably and they give you the instructions. It truly is pretty simple.


Sent from my iPad using Tapatalk

[reeltimebrad1]

Thanks for the reply's your both correct. The gasket is held in with silicone and has to be removed to replace the screen all of which can be done without removal of the frame or trim ring.

[williamwalter]

Just wondering if anyone has tried painting screens as mine are faded and look bad but are intact otherwise.