+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6)
+--- Forum: General Repairs & Maintenance (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=10)
+--- Thread: Bottom Job completed (/showthread.php?tid=580)
Bottom Job completed - anthem - 11-17-2013
Just finished having the bottom sanded, painted and some maintenance issues resolved. Previous owner banged one of the props, so I had them sent out for a tuneup. Seems they were over cupped, so I couldn't get anymore than 2550 RPM. Now I can get 2700 RPM and 29 knots with a light load. Did not have time to try different trim settings to see if I can increase speed. Seems I should get at least 30 knots. Will try again when I have more time to play. Also, replaced cutlass bearings. Vibrations are now gone. Hull looks like a million bucks after a compound and wax.