+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6)
+--- Forum: General Repairs & Maintenance (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=10)
+--- Thread: Outdrive cover - bottom painiting (/showthread.php?tid=6780)
Outdrive cover - bottom painiting - brijeski@optonline.net - 04-22-2020
[attachment=590][attachment=590]Hi - I've stripped my hull of all the bottom paint but came across a cover for the outdrives (both metal and fiberglass as shown in the picture). Does anyone know what's under it and if I should remove and clean before repainting the hull? I don't want to open a can of worms but want to make sure I do the right thing. If so, there's a sealant on the edge & what's used there as well.
Appreciate any advise - thank you!
John
RE: Outdrive cover - bottom painiting - Sans Peur - 04-22-2020
I would remove them and paint everything in there. Just because it is covered doesn't mean nothing will grow in there. I will bet if you use a light and look in you will.see older paint in there.
Outdrive cover - bottom painiting - Misdirection - 04-23-2020
And I think those are your prop shafts, not out drives, just so you know the correct terminology.
Sent from my SM-A505U using Tapatalk