+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: Tiara Yachts Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=6)
+--- Forum: General Repairs & Maintenance (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=10)
+--- Thread: Tiara 1990 36 Convertible Anodes (/showthread.php?tid=7561)
Tiara 1990 36 Convertible Anodes - Tiara 3600 - 05-01-2021
Any 36' convertible/open owners (I'm thinking the anodes would be the same for both models) out there that can help me with the location of the main anode that gets connected to the bonding system. When I replaced the shaft & rudder anodes, I didn't see any anodes on the transom. I didn't think much about it at the time. I was looking up info on the rest of the anodes I'd need to replace and reading up on bonding. Everything seems to be bonded so not sure where it's bonding to. Now the boat is in the water. Thanks for any help you can give me.
Tiara 1990 36 Convertible Anodes - Misdirection - 05-01-2021
My '86 3600 Open does not have any on the transom, nor does it have bolt or bolt holes where one may have been.
Sent from my SM-A505U using Tapatalk
RE: Tiara 1990 36 Convertible Anodes - Darby - 05-01-2021
Trim tabs have anodes on our '89.
Tiara 1990 36 Convertible Anodes - jmk - 05-16-2021
My 1990 3600 Open has a large plate zinc on the transom.
Sent from my iPhone using Tapatalk