Posts: 8
Threads: 4
Joined: Sep 2020
Reputation:
0
Home Port: Northport, NY
Vessel Info: 3600 Convertible 1990 with Crusader 350 HP
Any 36' convertible/open owners (I'm thinking the anodes would be the same for both models) out there that can help me with the location of the main anode that gets connected to the bonding system. When I replaced the shaft & rudder anodes, I didn't see any anodes on the transom. I didn't think much about it at the time. I was looking up info on the rest of the anodes I'd need to replace and reading up on bonding. Everything seems to be bonded so not sure where it's bonding to. Now the boat is in the water. Thanks for any help you can give me.
Posts: 463
Threads: 3
Joined: May 2018
Reputation:
7
Home Port: Ashtabula, OH
Vessel Info: 1986 Tiara 3600 Open, Crusader 454's
My '86 3600 Open does not have any on the transom, nor does it have bolt or bolt holes where one may have been.
Sent from my SM-A505U using Tapatalk
Posts: 6
Threads: 0
Joined: Feb 2021
Reputation:
0
Home Port: Massachusetts
Vessel Info: 1989 3600 Convertible .Twin Crusader 454
Trim tabs have anodes on our '89.
Posts: 106
Threads: 3
Joined: Mar 2013
Reputation:
1
Vessel Info: 36 Open Hardtop, 52 Express Hardtop
My 1990 3600 Open has a large plate zinc on the transom.
Sent from my iPhone using Tapatalk
