+- Tiara Yacht Owners Forum (https://www.tiaraownersclub.com/forum)
+-- Forum: General Discussion Forum (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=3)
+--- Forum: Tiara Yachts Model Discussion (https://www.tiaraownersclub.com/forum/forumdisplay.php?fid=24)
+--- Thread: Hatch and port crazing (/showthread.php?tid=8090)
Hatch and port crazing - Jfhaas - 01-03-2022
Have 97 40’ express. The three hatches polycarbonate is crazed. Read where companies can replace the glass. Any suggestions. Jack
RE: Hatch and port crazing - MC1600 - 01-03-2022
IIRC, they’re Bomar/Pompanette so I’d give them a call. I recently got interior hatch trim from them, so I’m sure they either have or can make the glass for you.
RE: Hatch and port crazing - jclark003 - 01-03-2022
My local glass shop cut new lenses and installed them for about $75 each. Otherwise order the lens from Pompanette/ Bomar and install yourself. Use a razor to cut the sealant, pop out the old lens, clean it all up and lay the new lens with recommended adhesive/ sealant. Mask everything off really well because the sealant makes a heck of a mess.
RE: Hatch and port crazing - Jfhaas - 01-05-2022
(01-03-2022, 05:47 PM)MC1600 Wrote: IIRC, they’re Bomar/Pompanette so I’d give them a call. I recently got interior hatch trim from them, so I’m sure they either have or can make the glass for you.
Thank you for your help..Jack
(01-03-2022, 09:35 PM)jclark003 Wrote: My local glass shop cut new lenses and installed them for about $75 each. Otherwise order the lens from Pompanette/ Bomar and install yourself. Use a razor to cut the sealant, pop out the old lens, clean it all up and lay the new lens with recommended adhesive/ sealant. Mask everything off really well because the sealant makes a heck of a mess.
Thanks for your help. Jack
RE: Hatch and port crazing - chuckkletecka - 01-12-2022
I had the 3 hatches on my '92 3100 Open done here: SonSet Marine
They did a great job!
sonsetmarine.com
RE: Hatch and port crazing - Jfhaas - 01-12-2022
(01-12-2022, 09:00 AM)chuckkletecka Wrote: I had the 3 hatches on my '92 3100 Open done here: SonSet Marine
They did a great job!
sonsetmarine.com
Thanks for help. Jack