Posts: 33
Threads: 15
Joined: Jan 2015
Reputation:
0
Home Port: Seattle
Vessel Info: 2005 Tiara 2900 Crusader 6.0L engines
I understand that my 2005 Tiara 2900 has a galvanic isolated installed. Can someone advise me just where this component resides. Thanks.
Posts: 702
Threads: 14
Joined: Dec 2010
Reputation:
11
Home Port: Kings Park, NY
Vessel Info: 2003 38' Open Cummin's 6CTA's (450 hp)
Not sure on the 29 but on my 38 Open there on the rear engine room bulkhead, starboard side. Right behind where the dockside power connections are.... Hope this helps.....
Posts: 494
Threads: 22
Joined: Apr 2012
Reputation:
5
Home Port: Stuart, FL
Vessel Info: 1988 36' Convertible with new 8.1 Crusaders.
Exceptional condition, inside, outside, bilges and engines.
It will be installed in series with the GREEN ground power line between the shore power connector and the main AC circuit breaker. Capt. George
Posts: 41
Threads: 0
Joined: May 2011
Reputation:
0
On my 29 it's in the same place ReelMagic said.
Mark - Reely Nauti
Posts: 33
Threads: 15
Joined: Jan 2015
Reputation:
0
Home Port: Seattle
Vessel Info: 2005 Tiara 2900 Crusader 6.0L engines
Thanks Guys. Off to the boat to look for it.
