I have 2013 6.0l Crusaders Captains choice in my Tiara 3100 Coronet. While trying the engine sync mode for the first time the other day I brought both motors up to WOT after a few seconds the starboard check engine light appeared and I immediately shut the motors down. After checking all the fluids and visual inspection of the motors, I restarted them both. The starboard check engine light blinks once every 5 seconds and after I start the motor light goes away and motor runs perfect. No issues or blinking MIL lights on the port motor.
Any ideas of what a single flash code may be, I have a service tech schedule, but it will take 2 weeks.
I didn't know that the dash lights indicate any particular flash code.
I was under the impression that if you had an engine fault and don't have a scan tool, you can hook an LED light to the data connector on the engine to get a particular flash code.