Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Transmission Oil Change
#1
6.0l Crusaders with ZF Hurth Xmissions

Manuals have some conflicting information on changing the transmission oil. Here is what I believe is the process. Please correct me if I am wrong.

1. Start engine and get the oil flowing in the lines to the oil cooler and in the cooler.

2. Stop engine and ASAP check the oil level (without screwing the dipstick back in) before the oil in the cooler and lines can flow back to the xmission. This is done so that when running the level is measured with oil in the lines and the cooler and filled as indicated by the dip stick. If not done this way and the oil has flowed back to the xmission the level will be low when the engine is running and the lines and cooler are filled.

3. I will note that the measuring portion of the dipstick is close in color to the fluid making it difficult to see just where on the dipstick the oil level is.

Appreciate comments on this. Thanks.
Reply
#2
That's pretty much it. After you do it once you'll know the correct amount the next time so you won't have to go through the measuring procedure again.
-------------------------
Tiara Dealer Locator
Reply
#3
(02-25-2017, 06:51 AM)YOLO Wrote: That's pretty much it. After you do it once you'll know the correct amount the next time so you won't have to go through the measuring procedure again.

Thanks YOYO>
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  [Tiara Open] Zf280 transmission pressure twilson0929 2 1,121 08-11-2025, 07:19 AM
Last Post: twilson0929
  Power issue livewell and oil change pump smagistro 1 863 04-22-2025, 06:07 AM
Last Post: Sans Peur
  oil change system honest mark 6 8,807 01-20-2023, 07:32 AM
Last Post: MC1600
  44 Coupe - change to different anchor? kysloc4 3 3,826 12-03-2022, 10:40 AM
Last Post: Sans Peur
  Transmission Fluid Venting through hull desjef 3 5,896 08-05-2016, 02:19 PM
Last Post: desjef



Users browsing this thread: 1 Guest(s)
Advertisements

Latest Threads
3500 Open deck lift piston
Last Post: hiccup
Today 08:10 AM
» Replies: 4
» Views: 1101
Oil Filter ?
Last Post: ReelMagic
Yesterday 04:23 PM
» Replies: 7
» Views: 1619
Unknown noise from Tiara 3800 Open engi...
Last Post: liambrown
Yesterday 01:54 PM
» Replies: 4
» Views: 537
Tiara 40 Express 2003 - Removal of Cleat
Last Post: saywhen
11-14-2026 05:25 PM
» Replies: 2
» Views: 380
3500 Sovran trimtabs
Last Post: drprunner
11-14-2026 03:44 PM
» Replies: 0
» Views: 58