Author's Statistic:
Posts: 4
Threads: 1
Likes Given: 1
Likes Received: 0 in 0 posts
Joined: Sep 2020
Home Port: Port Clinton Ohio
Vessel Info: 2004 35 open with 502 gasoline engines
Posts: 4
Threads: 1
Likes Given: 1
Likes Received: 0 in 0 posts
Joined: Sep 2020
Home Port: Port Clinton Ohio
Vessel Info: 2004 35 open with 502 gasoline engines
Author's Statistic:
Posts: 700
Threads: 14
Likes Given: 1
Likes Received: 92 in 84 posts
Joined: Dec 2010
Home Port: Kings Park, NY
Vessel Info: 2003 38' Open Cummin's 6CTA's (450 hp)
Posts: 700
Threads: 14
Likes Given: 1
Likes Received: 92 in 84 posts
Joined: Dec 2010
Home Port: Kings Park, NY
Vessel Info: 2003 38' Open Cummin's 6CTA's (450 hp)
I removed the coming pads on a 2003 38 Open and assume its the same. Look under the gunwales and you will see bolts that thread through the gunwale to the pads. Remove the bolts and they should come free, at least that the way mine were attached... Believe they were 1/4" requiring 7/16" wrench/socket
Author's Statistic:
Posts: 4
Threads: 1
Likes Given: 1
Likes Received: 0 in 0 posts
Joined: Sep 2020
Home Port: Port Clinton Ohio
Vessel Info: 2004 35 open with 502 gasoline engines
Posts: 4
Threads: 1
Likes Given: 1
Likes Received: 0 in 0 posts
Joined: Sep 2020
Home Port: Port Clinton Ohio
Vessel Info: 2004 35 open with 502 gasoline engines
09-22-2020, 09:53 AM (This post was last modified: 09-22-2020, 09:59 AM by rhhansen52.)
(09-17-2020, 10:53 AM)ReelMagic Wrote: I removed the coming pads on a 2003 38 Open and assume its the same. Look under the gunwales and you will see bolts that thread through the gunwale to the pads. Remove the bolts and they should come free, at least that the way mine were attached... Believe they were 1/4" requiring 7/16" wrench/socket
Thanks for the info but my 35 is different. My old 31 had bolts to remove the pads but the 35 has no access to any bolts. They are either glued on or have some type of clips that probably let the pads just slide up. I don't want to try sliding up if they are glued on.
Author's Statistic:
Posts: 700
Threads: 14
Likes Given: 1
Likes Received: 92 in 84 posts
Joined: Dec 2010
Home Port: Kings Park, NY
Vessel Info: 2003 38' Open Cummin's 6CTA's (450 hp)
Posts: 700
Threads: 14
Likes Given: 1
Likes Received: 92 in 84 posts
Joined: Dec 2010
Home Port: Kings Park, NY
Vessel Info: 2003 38' Open Cummin's 6CTA's (450 hp)
The pads are bolted on our 2004 35 open. It is something like six nuts on each pad. I had to lay on the floor to see and get access to them. Also bolted on the transom, except for the transom door.
Author's Statistic:
Posts: 4
Threads: 1
Likes Given: 1
Likes Received: 0 in 0 posts
Joined: Sep 2020
Home Port: Port Clinton Ohio
Vessel Info: 2004 35 open with 502 gasoline engines
Posts: 4
Threads: 1
Likes Given: 1
Likes Received: 0 in 0 posts
Joined: Sep 2020
Home Port: Port Clinton Ohio
Vessel Info: 2004 35 open with 502 gasoline engines