Posts: 63
Threads: 30
Joined: Jan 2019
Reputation:
1
Home Port: Shark River NJ
Vessel Info: 1995 3300 open
Twin 454 crusaders 2017
08-11-2019, 04:42 PM
(This post was last modified: 08-11-2019, 04:46 PM by Mydiamond.)
[attachment=551]I am looking to replace the tach's on my Tiara because they are jumping.
Connections are clean...
Anyone know the current replacement VDO line?
Thank you[attachment=550]
[attachment=552]the twist lock mounting is hard to find
Posts: 48
Threads: 8
Joined: Sep 2019
Reputation:
0
Home Port: Pompano Beach, Fl.
Vessel Info: 1999 2900 Coronet, 7.4 mpi Crusaders
Hello,
Before you buy new ones, see if you can locate the switch on back that is used to select the number of cylinders. Note where it is presently set. Take a small screwdriver and rotate the switch back and forth thru it's range several times and put it back where it was originally set.
See if that clears the problem. Often, those contacts corrode and can cause that problem.
Regards,
Paul
Posts: 63
Threads: 30
Joined: Jan 2019
Reputation:
1
Home Port: Shark River NJ
Vessel Info: 1995 3300 open
Twin 454 crusaders 2017
Thanks.
Did the turning of the switches a few times as well as replaced belts.
Seams to have solved the issue.
