Posts: 4
Threads: 3
Joined: Sep 2019
Reputation:
0
Home Port: SWFlorida
Vessel Info: 2008 35 Tiara Sorvan with diesels
The Available light on the electric breaker panel flickers. Anyone have any thoughts? Bulb burning out or loose wire?
Posts: 398
Threads: 37
Joined: Jun 2020
Reputation:
3
Home Port: Annapolis, MD
Vessel Info: Currently looking
I’m in the same boat (pun intended) so anxiously awaiting some input.
Posts: 481
Threads: 8
Joined: Apr 2018
Reputation:
10
Home Port: Port Canaveral, FL
Vessel Info: 2003 Tiara 50 Open
3406E Cats
The lights are on a single ground. If all are flickering start looking at the ground wire and trace it from there. Unless you are very familiar with AC voltage,, make sure the power is disconnected before going behind the panel.
I would look for the common ground wire for the lights and start cleaning connections. If all are flickering it will be one of the main terminals. Remember the AC and DC are two totally separate circuits.
Posts: 251
Threads: 4
Joined: Nov 2021
Reputation:
12
Home Port: Newport
The reverse polarity/available lights only last so many hours 'on'. So, the sore power 'available' light, which is 'on' for hours on end during the season, tends to get dimmer and dimmer over the years and can start to flicker even when things are 'ok'. Tiara typically used Solico 3450-4-50-19314 for this light and it is easy to replace, although be aware it has live AC to it when plugged into shore power/generator on/etc.
There are shorepower wiring problems that can cause the light to flicker, but most likely (especially if it is dim), the problem is with the hours on the bulb. You could trying swapping the generator light for the shorepower to see if that fixes it, then buy the replacement.