Posts: 27
Threads: 11
Joined: Jul 2021
Reputation:
0
Home Port: CT
Vessel Info: 2000 4300 open 3196 CAT's
Anyone have any advice on the best prop to use for a 43 OPEN with CAT 3196's making 660 hp. I have to replace my set and was wondering if there is any new technology versus the traditional 3 blade prop that I am using now.
Current prop on boat is Federal Equi-Poise Cup 27x36. I hit 2330 rpm's WOT at around 33 knots.
Posts: 41
Threads: 9
Joined: Jun 2022
Reputation:
2
Home Port: Longboat Key, FL
Vessel Info: 2020 53 Fly
CAT 12.9-1000 Straight Shaft
I would say you are propped correctly. 2330 is what the 3196s should see at WOT.
2020 53 Fly
CAT 12.9L-1000, straight shaft
Gulf Coast Florida
Posts: 486
Threads: 3
Joined: Apr 2013
Reputation:
20
Home Port: Lake Michigan
Vessel Info: 52 Sovran, Cat 3406
The Acme 4 blade should give you a little stern lift and a little better speed across the rpm range. They are an expensive set of wheels but if cost is no object then take a look and more importantly, see if you can borrow a set to see how your boat performs. 2320-2350 is what you want to see at full engine load and gross vessel weight.
Posts: 27
Threads: 11
Joined: Jul 2021
Reputation:
0
Home Port: CT
Vessel Info: 2000 4300 open 3196 CAT's
Thank you for the information. Did you switch from 3 blade to 4 blades and experience the increase in performance?
Posts: 486
Threads: 3
Joined: Apr 2013
Reputation:
20
Home Port: Lake Michigan
Vessel Info: 52 Sovran, Cat 3406
I did not change out the props on my 43 but another 43 open maintained by the same yard put them on and reported well over a 2 knot speed increase, smoother operation and better handling. If you are serious send me a PM and I’ll try to connect you with the owner who has first hand knowledge.
