Posts: 52
Threads: 11
Joined: Dec 2010
Reputation:
0
Boat is a 1988 31' Open. Old owner had a roll of 5/16" that looks like he was using, but my online research is saying 1/4" GFO. Anyone know which is correct? When opened up pulled out 2 piece from each.
Thanks
Capt. Ryan
Posts: 23
Threads: 5
Joined: Nov 2010
Reputation:
0
While I don't know the answer, my first guess would have been 1/4"
Posts: 22
Threads: 4
Joined: Nov 2010
Reputation:
0
1/4" flax packing is correct
Posts: 52
Threads: 11
Joined: Dec 2010
Reputation:
0
Thanks, Secondchance if the previous owner had run 5/16" do think is problem or any issue switching back?
Posts: 22
Threads: 4
Joined: Nov 2010
Reputation:
0
It shouldnt be just get it all out and repack.
Posts: 494
Threads: 22
Joined: Apr 2012
Reputation:
5
Home Port: Stuart, FL
Vessel Info: 1988 36' Convertible with new 8.1 Crusaders.
Exceptional condition, inside, outside, bilges and engines.
Don't use Flax packing, that's old school. Use the 1/4" GFO brand. It lasts forever and only needs an adjustment after the initial 2 hour run. Then it stays drip free. You will have problems with the dust in your bilge. Capt. George
