08-03-2018, 10:40 AM
Greetings,
For future reference I did indeed contact Bomar. These hatch rings are NOT available anywhere, even from Bomar...Bomar ran my serial numbers and had to fabricate these Trim rings which seems to be standard practice for them. The rings are $106 each and require a 5-week lead time, though mine were delivered in under 4wks. While the tolerance seems really tight, the rings fit right in with no trimming required. You also have to measure and drill the mounting holes, I would recommend NOT trying to line up holes, fill holes with sealant and redrill.
The part number is listed below, but BOMAR will require you to provide the serial number from your hatch. The 15yr old hatchrings literally fell apart as I removed them.
nt1022--2"-O-W
For future reference I did indeed contact Bomar. These hatch rings are NOT available anywhere, even from Bomar...Bomar ran my serial numbers and had to fabricate these Trim rings which seems to be standard practice for them. The rings are $106 each and require a 5-week lead time, though mine were delivered in under 4wks. While the tolerance seems really tight, the rings fit right in with no trimming required. You also have to measure and drill the mounting holes, I would recommend NOT trying to line up holes, fill holes with sealant and redrill.
The part number is listed below, but BOMAR will require you to provide the serial number from your hatch. The 15yr old hatchrings literally fell apart as I removed them.
nt1022--2"-O-W
